Setting Code Lengths Via Serial Commands - Symbol SE955 Integration Manual

B-6 SE955 Integration Guide

Setting Code Lengths Via Serial Commands

There are two lengths (L1 and L2) for each variable length code type. See the individual code types in 8 for the L1 and L2 parameter
numbers.
Depending on the selected option, the scan engine decodes:
• One discrete length bar code
• Two discrete length bar codes
• Bar codes within a range of lengths within the scan engine capability
• Any length of bar codes within the scan engine capability.
Table B-4 lists the requirements for each option.
One discrete length is decoded.
Two discrete lengths is decoded.
Lengths within a range are decoded within the scan engine
capability.
Any length bar code is decoded within the scan engine
capability.
Table B-4. Setting Variable Code Lengths
Code Length Option L1 value
Discrete length to decode 0x00
Higher length value Lower length value
Lower length value Higher length value
0x00 0x00
L2 value