Download
Share
Print this page
Metra Electronics 99-9014HG Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Metra Electronics Manuals
  4. Automobile Accessories
  5. 99-9014HG
  6. Installation instructions manual

Metra Electronics 99-9014HG Installation Instructions Manual

For volkswagen jetta 2019-up
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Support bracket • D) Blank panel • E) #4 x 3/8" Phillips pan-head screws (6)
• F) #8 x 3/8" Phillips truss-head screws (2) • G) #8 x 1/2" Phillips truss-head screws (4) • H) Panel clips (2) • I) Panel clip mounts (2)
A
B
Metra. The World's Best Kits.
®
Volkswagen Jetta
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision
• ISO DDIN radio provision †
• Pioneer modular DDIN radio provision †
• Painted high gloss black to match the factory finish
† Only for with ISO DDIN radios which have an "L" shaped chassis design, with the radio chassis at the
top of the screen. At present only the Sony XAV-AX100, XAV-AX200, and XAV-AX5000 radios have this
design. The Pioneer modular radios, DMH-C2550NEX and DMH-C2500NEX, can also be used.
C
D
F
G
MetraOnline.com
2019-Up
E
H
I
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-9014HG
I N S TA L L AT I O N I N S T R U C T I O N S

TABLE OF CONTENTS

Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
-ISO DIN radio provision .......................................5
-ISO DDIN radio provision .....................................6
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: AXTC-VW2
Antenna Adapter: 40-EU56-36
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Cutting tool • T-20 Torx driver
• VW radio removal tool (Metra part #86-9001)
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 10/10/19 INST99-9014HG

Advertisement

loading

Related Manuals for Metra Electronics 99-9014HG

Summary of Contents for Metra Electronics 99-9014HG

  • Page 1: Table Of Contents

    When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 10/10/19 INST99-9014HG...

  • Page 2: Dash Disassembly

    DASH DISASSEMBLY 1. Open the driver’s door, then unclip 4. Unclip and remove the trim panel and remove the dashboard side panel. directly below the far right a/c vent. (Figure A) Remove (2) T-20 Torx screws exposed. (Figure D) 2. Unclip and remove the trim panel 5.
  • Page 3 DASH DISASSEMBLY (CONT.) 6. Unclip and remove the trim panel above 8. Unclip and remove the radio & the glove box. Remove (3) T-20 Torx instrument-cluster trim panel, including screws exposed, securing the radio & the shroud loosened in the prior step. instrument trim panel.

  • Page 4: Kit Preparation

    KIT PREPARATION 1. Attach the factory metal clips removed 4. Secure the panel clip mounts to the in Dash Disassembly to the radio trim radio trim panel using (4) #4 x 3/8” panel. (Figure A) Phillips pan-head screws provided. (Figure D) 2.

  • Page 5: Kit Assembly

    KIT ASSEMBLY ISO DIN radio provision 5. Slide the radio assembly into the dash, then secure using (2) #8 x 1/2” Phillips 1. Remove the metal DIN sleeve and trim truss-head screws up top, and (2) #8 x ring from the aftermarket radio. 3/8”...

  • Page 6: Iso Ddin Radio Provision

    KIT ASSEMBLY ISO DDIN radio provision 1. Cut the radio brackets at the scored line. (Figure A) 2. Secure the radio brackets to the radio using screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna connector at the radio location above the glove-box.

  • Page 7: Pioneer Modular Ddin Radio Provision

    KIT ASSEMBLY Pioneer Modular DDIN radio provision 4. Slide the Pioneer radio assembly into the dash, then secure using (2) #8 x 1/2” Note: For steps 1 and 2, reference the Phillips truss-head screws up top, and installation manual provided with the radio (2) #8 x 3/8”...
  • Page 8 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 10/10/19 INST99-9014HG...