Mercedes-Benz G-Class Owner's Manual page 69

X
Pull out connector = and housing connec-
tor ?.
X
Unclip retaining spring A.
X
Pull out the bulb.
X
Insert the new bulb so that the base fits
flush in the recess.
X
Clip retaining spring A back in.
X
Attach connector = and housing connec-
tor ? to the new bulb.
X
Reinsert front foglamp :.
X
Replace and tighten screws ;.
Blackout lighting (vehicles with a 24 V
electrical system)
X
Switch off the lights.
X
Unscrew screws ;.
X
Pull the lamp with cover : forward out of
the recess.
X
Pull seal = off cover :.
X
Turn bulb ? anti-clockwise, applying slight
pressure, and remove it from the bulb
holder.
X
Insert the new bulb into the bulb holder and
turn it clockwise until it engages.
X
Clamp seal = on cover :.
X
Insert the lamp with cover : and press in
firmly.
Seal = must fit tightly around the circum-
ference.
X
Replace and tighten screws ;.
Turn signals
! Do not fasten the screws too tightly. You
could otherwise damage the lens.
Replacing bulbs
Z
67