Mercedes-Benz G-Class Owner's Manual page 121

Activating the display
Example: instrument cluster recess
Example: display with standard display
:
To adjust the instrument cluster lighting:
;
brighter
To adjust the instrument cluster lighting:
=
dimmer
Inoperative
?
Total distance recorder/trip meter selec-
A
tor button, reset button
The display is activated when you:
switch on the ignition
R
switch on the battery main switch
R
Total distance recorded/trip meter
Distance recorder
X
Press button A on the lower section of the
instrument cluster (
The display alternates between the total
distance recorder and the trip meter dis-
play.
ASSYST service interval display
X
Press button A twice in rapid succession.
The ASSYST service interval display
( Y page 145) is displayed.
Y page 119).
Displays and operation
Resetting the trip meter
X
Press button A on the lower section of the
instrument cluster (
until the trip meter is displayed.
X
Press button A again and keep it pressed
until the display is reset.
Instrument cluster lighting
The lighting in the instrument cluster, in the
displays and the controls in the vehicle inte-
rior can be adjusted using the brightness con-
trol knob.
With buttons ; and = at the lower section
of the instrument cluster (
can adjust the brightness of the instrument
lighting.
X
Make sure that the key is in position 2 in
the ignition lock.
X
Make sure that the side lamps, dipped-
beam headlamps or main-beam headlamps
are switched on.
X
Brighter: press button ;.
X
Dimmer: press button =.
Y page 119) repeatedly
Y page 119), you
Z
119