Mercedes-Benz G-Class Owner's Manual page 140

Features
138
X
Only mount the bonnet from the centre at
the front.
X
Only stand on the area intended for this
purpose.
Bodystyling bar
i If the bodystyling bar must be removed,
contact a qualified specialist workshop.
Assembly tool
General notes
On vehicles with the radio aerial on the wing,
assembly tool : is included in the scope of
delivery and assists in removing and securing
the radio aerial. The assembly tool is on the
vehicle key ring.
Removing/securing the radio aerial
To remove the radio aerial:
X
Place assembly tool : around radio aer-
ial ;.
X
With assembly tool :, loosen radio aer-
ial ; anti-clockwise.
X
Remove the assembly tool from the radio
aerial.
X
Manually unscrew the radio aerial anti-
clockwise.
To secure the radio aerial:
X
Manually screw the radio aerial in clock-
wise.
X
Place assembly tool : around radio aer-
ial ;.
X
With assembly tool :, screw in radio aer-
ial ; clockwise until tight.
X
Remove the assembly tool from the radio
aerial.
Floormat on the driver's side
G
WARNING
Make sure that there is sufficient clearance
around the pedals when floormats are used,
and that the floormats are properly secured.
The floormats must be correctly secured at all
times using the securing knob and retainers.
Before you drive off, check the floormats and
secure them if necessary. A floormat which is
not properly secured can slip and thereby
interfere with the movement of the pedals.
Do not place floormats on top of one another.