Mercedes-Benz G-Class Owner's Manual page 34

Children in the vehicle
32
Example: vehicles with a 12 V electrical system
X
Move the head restraint upwards.
X
Fit the ISOFIX child restraint system with
Top Tether. Comply with the manufactur-
er's installation instructions when doing so.
X
Route Top Tether belt = under the head
restraint between the two head restraint
bars.
X
Hook Top Tether hook : to Top Tether
anchorage ; on the side wall.
X
Hook Top Tether hook : of Top Tether belt
= into Top Tether anchorage ;.
Ensure that:
Top Tether hook : is hooked into Top
R
Tether anchorage ; as shown
Top Tether belt = is not twisted
R
X
Make sure that Top Tether belt = is not
twisted.
X
Tension Top Tether belt =. Comply with
the manufacturer's installation instruc-
tions when doing so.
X
Move the head restraint back down again
slightly if necessary ( Y page 52). Make
sure that you do not interfere with the cor-
rect routing of Top Tether belt =.