Mitsubishi Electric MELSEC Q Series User Manual page 87

5 UTILITY PACKAGE (GX Configurator-DA)
GX Configurator-DA
3)
QCPU
Q25HCPU
MODE.
RUN.
ERR.
USER.
BAT.
BOOT.
A
USB
RS-232
Figure 5.1 Correlation chart for data created with the utility package
5 - 8
(b) Text files
A text file can be created by clicking the Make text file
setting, Auto refresh setting, or Monitor/Test screen.
The text files can be utilized to create user documents.
GX Developer/
Project
1)
A
2)
Steps 1) to 3) shown in Figure 5.1 are performed as follows:
1) From GX Developer, select:
[Project]
2) On the intelligent function module selection screen of the utility, select:
[Intelligent function module parameter]
parameters]
3) From GX Developer, select:
[Online]
module parameters"
Alternatively, from the intelligent function module selection screen of
the utility, select:
[Online]
Disk
Project
A
B
A: Intelligent function module parameters
B: Data saved by "Make text file"
[Open project]/[Save]/[Save as]
[Read from PLC]/[Write to PLC]
[Read from PLC]/[Write to PLC]
MELSEC-Q
button on the initial
Personal computer
[Open parameters]/[Save
"Intelligent function
5 - 8