Mitsubishi Electric MELSEC Q Series User Manual page 145

7 ONLINE MODULE CHANGE
7 - 22
(f) On the monitor/test screen of GX Configurator-DA, set a value in the
Setting value field of CH
[Execute test] button.
(g) Turn on CH
check whether proper conversion has been made or not.
(Be careful since analog outputs are provided actually)
(5) Resumption of control
(a) After choosing [Diagnosis] - [Online module change] on GX Developer to
display the "Online module change" screen again, click the [Execution]
button to resume control. Module ready (X0) turns on.
(b) The "Online module change completed." screen appears.
Digital value of the used channel, and click the
Output enable/disable flag (Y1, Y2) of the used channel and
MELSEC-Q
7 - 22