When Connecting By Extending The Cable - Omron K6CM User Manual

5-3-2

When Connecting by Extending the Cable

The cable between the pre-amplifier and K6CM device can be extended using a commercially avail-
able cable, connectors, and terminal block.
You can use either a screw terminal block type or push-in plus terminal block for the terminal block.
Connector
connection
K6CM-VB
Sensor head
K6CM-VBS
Pre-amplifier
Additional Information
• The terminal block of the K6CM device is the push-in plus type only.
Even if you join the cables via a screw terminal block type, we recommend using ferrules for
connecting with the K6CM device.
• The cable can be extended in the same way also for the insulation resistance sensor (special
ZCT (IRT)).
Detailed Conditions of Extension Cable
 Core wires (signal wires) of extension cable
Select the following cable.
The distance that the cable can be extended is a maximum of 99 m (the total maximum distance is
100 m including the 1 m cable supplied with the pre-amplifier).
AWG24 to AWG16
4 core wires (2 twisted pairs)
Shielded cable (Grounding of shield is unnecessary.)
Additional Information
Recommended cable
We recommend 2464C BIOS-CL3-2402P-B manufactured by Bando Densen Co., Ltd., which
satisfies the extension cable requirements. The cable is identical to the cable that is supplied
with the pre-amplifier, and will allow you to match the colors of the core wires.
For details, contact Bando Densen Co., Ltd.. http://www.bew.co.jp/
K6CM Motor Condition Monitoring Device User's Manual (N219)
Shielded 4-core cable
(2 twisted pairs, AWG24 to AWG16)
Cable length: 1 m
Extension cable specifications
5 Installation and Wiring
Red
Red/
white
Black
Black/
white
Maximum length: 99 m
Connector,
terminal block
Push-In Plus
Terminal Blocks
7 8
9 10
Grounding unnecessary
5 - 17
5