Siemens SIMATIC ET 200SP Manual page 26

Technical specifications
6.1 Technical specifications
Analog outputs
Number of analog outputs
Voltage output, short-circuit current, max.
Cycle time (all channels), min.
Output ranges, voltage
0 to 10 V
1 to 5 V
-5 to +5 V
-10 to +10 V
Output ranges, current
0 to 20 mA
-20 to +20 mA
4 to 20 mA
Connection of actuators
for voltage output two-wire connection
for voltage output three-wire connection
for voltage output four-wire connection
for current output two-wire connection
Load resistance (in nominal range of the output)
For voltage outputs, min.
For voltage outputs, capacitive load, max.
For current outputs, max.
For current outputs, inductive load, max.
Destruction limit for externally applied voltages and currents
Voltages at the outputs
Cable length
Cable length shielded, max.
Analog value formation
Oscillation time
For resistive load
For capacitive load
For inductive load
Errors/accuracies
Linearity error (in relation to output range), (+/-)
Temperature error (in relation to output range), (+/-)
Crosstalk between outputs, min.
Repeat accuracy in settled state at 25 °C (in relation to out-
put range), (+/-)
Operational limit in the entire temperature range
Voltage in relation to output range, (+/-)
Current in relation to output range, (+/-)
26
6ES7135-6HD00-0BA1
4
45 mA
5 ms
Yes; 15 bits
Yes; 13 bits
Yes; 15 bits including sign
Yes; 16 bits including sign
Yes; 15 bits
Yes; 16 bits including sign
Yes; 14 bits
Yes
Yes
Yes
Yes
2 kΩ
1 µF
500 Ω
1 mH
30 V
1000 m; 200 m for voltage output
0.1 ms
1 ms
0.5 ms
±0.03 %
0.005 %/K
-50 dB
±0.05 %
±0.5 %
±0.5 %
Analog Output Module AQ 4xU/I ST (6ES7135-6HD00-0BA1)
Manual, 03/2016, A5E03573365-AD