Weider WESY96352 User Manual page 16

32. Wrap the Military Press Cable (72) around a
3 1/2" Pulley (15). Attach the Pulley to the Top
Frame (55) with a 3/8" x 2" Bolt (12) and a
3/8" Nylon Locknut (21).
See the inset drawing. Wrap the Long Cable
(72) around a 3 1/2" Pulley (15). Attach the
Pulley and a Cable Trap (66) to the bracket
on the Stabilizer (5) with a 3/8" x 2" Bolt (12)
and a 3/8" Nylon Locknut (21). Be sure that
the Cable Trap is turned to hold the Cable
in place.
33. Wrap the Military Press Cable (72) around a 3
1/2" Pulley (15). Attach the Pulley and a
Cable Trap (66) to the Pivot Arm (101) with
the 3/8" x 3 3/4" Bolt (88), a 3/8" Flat Washer
(9), and a 3/8" Nylon Locknut (21). Be sure
that the Nylon Locknut is on the side
shown and that the Cable Trap is posi-
tioned to hold the Cable in place.
32
55
15
21
72
33
15
66
88
16
12
12
Bracket
66
15
5
9
101
21
72
72
21