Weider WESY39311 User Manual page 22

ATTACHING AND REMOVING THE SEAT
8
40
To attach the Seat (13), set the bracket on the Front
36
Seat Frame (36) onto the indicated pin on the Front
13
Upright (42). Attach the Front Seat Frame to the Front
Upright with the 5/16" x 2 3/4" Carriage Bolt (14),
14
5/16" Washer (8) and the Seat Knob (40).
42
For some exercises, the Seat (13) must be removed.
Pin
First, be sure that the chain is not attached to the leg
lever. Next, remove the Seat Knob (40), 5/16" Washer
(8) and the 5/16" x 2 3/4" Carriage Bolt (14) from the
Front Seat Frame (36). Lift the Front Seat Frame off
the Front Upright (42).
ATTACHING THE LEG LEVER TO THE LOW
PULLEY STATION
To use the Leg Lever (29), the seat must be attached
to the front upright (see ATTACHING AND REMOV-
53
ING THE SEAT above).
29
52
35
Attach one end of the Chain (52) to the Low Cable
(23) with a Cable Clip (53). Attach the other end of
53
the Chain to the 5/16" x 2" Eyebolt (35) with a Cable
Clip.
23
ADJUSTING THE LEG PRESS PLATE
Remove the Press Pin (97) from the Leg Press Plate
95
Welded
(95) and the Leg Press Arm (96).
Tube
Align the welded tubes on the Leg Press Plate (95)
with the desired set of holes in the Leg Press Arm
(96). Re-insert the Press Pin (97) through the welded
97
tubes on Leg Press Plate and the holes in the Leg
Press Arm.
96
22