Weider WESY29521 User Manual page 6

3. Attach the Base Plate (37) to the Left Base (2)
with an M10 x 135mm Bolt (58) and an M10
Nylon Locknut (70). Be sure that the textured
side is on top.
Attach the Left Upright (7) to the Left Base (2)
with the two indicated M10 x 65mm Carriage
Bolts (57) and two M10 Nylon Locknuts (70).
Attach the Left Leg (36) to the Left Base (2) with
the two indicated M10 x 65mm Carriage Bolts
(57) and two M10 Nylon Locknuts (70). Be sure
the large upper hole in the Left Leg is on the
side shown.
Do not tighten the M10 Nylon Locknuts (70)
yet.
4. Press a 50mm x 70mm Inner Cap (22) into the
top of the Right Leg (73).
Attach the Right Leg (73) to the Right Base (1)
with the two indicated M10 x 65mm Carriage
Bolts (57) and two M10 Nylon Locknuts (70).
Attach the Right Upright (6) to the Right Base (1)
with the two indicated M10 x 65mm Carriage
Bolts (57) and two M10 Nylon Locknuts (70).
Do not tighten the M10 Nylon Locknuts (70)
yet.
3
7
2
70
57
4
22
73
70
6
36
70
Large
Hole
70
70
70
57
58
6
70
70
70
57
1
57
37