Part Identification Chart - Weider WESY20000 User Manual

Part Identification ChartÑModel No. WESY20000
R0800A
Refer to the drawings below to identify small parts used in assembly. The number in parenthesis below each
drawing is the key number of the part, from the Part List in the center of this manual. The number following the
key number is the quantity used in assembly. Note: Some small parts may have been pre-attached. If a part
is not in the parts bag, check to see if it has been pre-attached.
21mm Spacer (41)Ð2
12.5mm Spacer (35)Ð2
M8 Nylon Locknut (37)Ð2
M10 Nylon Locknut (42)Ð18
M10 Flat Washer (44)Ð16
M4 x 16mm Screw (26)Ð1 M4 x 25mm Screw (57)Ð2
M6 x 16mm Screw (31)Ð8
M10 x 27mm Bolt (51)Ð3
M10 x 42mm Bolt (46)Ð4
M10 x 67mm Bolt (48)Ð7
M10 x 60mm Bolt (38)Ð1
M10 x 127mm Bolt (43)Ð1
5