47. Attach the Backrest (73) to the Center Upright
(29) with two M6 x 63mm Screws (106) and two
M6 Washers (98).
Attach the Headrest (72) to the Center Upright
(29) in the same manner.
48. Attach an Arm Pad (74) to the VKR Arm (52) with
two M6 x 57mm Screws (113) and two M6
Washers (98).
Repeat this step for the other Arm Pad (not
shown).
49. Insert the Barbell (35) through the Right and Left
Guides (39, 38). Attach the Left Barbell Adapter
(36) to the Barbell with an M8 x 63mm Bolt (118),
two M8 Washers (95), and an M8 Nylon Locknut
(97).
Attach the Right Barbell Adapter (not shown)
in the same way.
47
73
48
74
49
39
35
23
72
106
98
106
98
29
52
113
98
38
118
95
36
95
97