Weider WEBE4496.0 User Manual page 21

41. Locate the Low Cable (58). Route the Cable
through the Center Upright (29). Attach two Small
Pulleys (59) inside the Center Upright with two
M10 x 91mm Bolts (112), four M10 Washers (96),
and two M10 Nylon Locknuts (94).
42. Wrap the Low Cable (58) under a Small Pulley
(59). Attach the Small Pulley and a Cable Trap
(76) to the first hole in the Rear Base (25) with an
M10 x 50mm Bolt (111) and an M10 Nylon
Locknut (94).
43. Wrap the Low Cable (58) under a Small Pulley
(59). Attach the Small Pulley and a Cable Trap
(76) to the third hole in the Rear Base (25) with
an M10 x 50mm Bolt (111) and an M10 Nylon
Locknut (94).
41
94
96
59
58
59
42
94
43
21
29
96
59
58
76
25
111
58
94
59
76
25
111
112