Interlogix ATS 500A Series User Manual page 33

8.5.4.1.n.5 Event types
1>Alarms
Enabled
The menu allows you to select types of events that will be sent to the
smartphone.
If the option is enabled, any event of that category is sent via push notification to
the assigned user.
The following options are available:
•
1 Alarms: Alarms pending, Panic, RF Jamming, Tampers, Soak, Technical
•
2 Set/unset: Set, Unset, Part set, Inhibit
•
3 Power: Battery fault, Battery low, Mains fault, PSU fault
•
4 System: Engineer reset, Service, Local programming, RFU events, Auto CS
test, Isolation
•
5 Video: Picture memory full, Picture deleted, Picture taken
•
6 Fault: Ethernet link, Communication, Fuse, Power and internal faults and
restores
•
7 Access: Access denied, access granted
8.5.4.1.n.6 Delete notification
6 Delete notif.
>Cancel<
Use the menu to remove the selected push notification from the system. To
remove the notification, select OK and press Enter again. The notification is
deleted.
Advisor Advanced ATSx500A User Guide 27