Panel Status - Interlogix ATS 500A Series User Manual

Panel status

4 Panel status
The "Panel status" function lists zones that are in alarm or tamper alarm, zones
that are inhibited or active, plus system alarms.
There are menu options that display each of these conditions separately.
However, this option can be used to check on all zones that need attention.
If you are allowed, you can see the panel current status using the "4 Panel
status" menu.
The following data can be viewed:
•
1 View open zones: Displays zones that are not in normal state. The top line
shows the zone that is not in normal state. The bottom line shows the zone
status.
•
2 Alarms: Displays and lets you to acknowledge pending alarms.
•
3 Faults: Displays active faults.
Advisor Advanced ATSx500A User Guide 21