Interlogix ATS 500A Series User Manual page 19

1 2 3 4 5 6 7 8
█ [ ] √ x ? + +
Each area in the list has an indicator that describes its status. The following area
statuses are available.
Table 4: Area statuses and indicators for different keypads
Area status
Ready to set
Not ready to set
Exit time
Alarm
Set
Part set 1
Part set 2
Selected
Depending on the type of the list, you now have the following options.
Selecting areas in the list
•
To select or deselect an area, enter the area number. Note that you can only
select areas that are currently shown on the display.
•
To continue with selected, or with all areas if none selected, press Enter, or
Right, or 0.
•
To cancel, press Clear.
Selecting areas in the symbolic line
All areas are selected by default.
•
To select or unselect an area, enter the area number. Note that you can only
select areas that are currently shown on the display.
•
To set or unset selected areas, press Enter or 0.
•
To cancel, press Clear.
Area group list
If you are authorized to set or unset area groups, these will be displayed instead
of single areas.
Set or unset area groups the same way as described for areas above.
Advisor Advanced ATSx500A User Guide
List
Space
?
x
!
*
−
=
+
Symbolic line
√
?
x

█
[
]
+ (blinking)
13