01.02
4.4.11
Automatic Alignment
Automatic alignment of the monitor is automatically activated if a picture is
displayed which has never been displayed before.
• This function can also be activated manually by pressing the "+" key while the
OSD menu is not currently being displayed.
A window appears which contains information on the video signal source.
• Pressing the "-" key then causes the automatic alignment procedure to start.
The message "Auto in Progress" appears on the screen during the alignment.
After the procedure has finished the previous picture is restored to the screen.
The brightness, contrast, frequency, phase and picture position are all
automatically adjusted.
If, due to insufficient picture information, the automatic alignment does not work
correctly, the parameters can all be adjusted manually as described above.
High-Resolution 18" LCD Monitors SCD 1898-I/IT
A5E00120696
Instruction manual
33