Siemens SCD 1898-I Instruction Manual page 25

01.02
Caution
Failure to observe the warnings may result in substantial damage to
property.
Provide sufficient heat dissipation
Slits are provided on the base, on the top of the cover, rear panel and side panels
for air circulation.
The monitor should be placed on a hard level surface, at least 10 cm away from
the wall and 15 cm away from other devices.
The permissible ambient temperature range (5 °C to 35 °C) must not be violated.
Do not subject monitor to unnecessary shocks
Take care when transporting! Use the original packaging! The panel in particular
should be protected against shocks.
Device cleaning / cleaning agents
•
The front panel is extremely sensitive to mechanical damage. Avoid all
scratches, knocks etc.!
•
Remove any water drops immediately; extended contact with water discolors
the surface.
•
If the front panel is dirty, clean using a microfiber cloth, if necessary with a
glass cleaning agent*. Only clean the housing using a plastics cleaning agent*.
* Caution:
Do not use cleaning agents which attack the components, e.g. petroleum spirit.
High-Resolution 18" LCD Monitors SCD 1898-I/IT
A5E00120696
Instruction manual
23