Controls For The Display Unit Ds-600 - Furuno GS-100 Operator's Manual

6.2

Controls for the Display Unit DS-600

1
PWR
No.
1 PWR
2 DISP
3 TRKG/MODE
4 UNIT
5 RNG
6 DAY/NT
7 MENU ESC
8 ENT
9 BRILL
PWR
2
DISP
TRKG
MODE
3
Control
Turn the power on and off.
• Select a display.
• Close the menu and return to the last-used display.
• In multiple data displays, select a data indication to change
its unit of measurement (with the UNIT key).
Select the ship speed mode between SOG and STW.
Select the unit of measurement for speed, depth, distance, cur-
rent (tide) speed, wind speed, etc.
Select the range in the berthing and echo monitor displays.
Select the daytime and nighttime displays alternately.
• Open the menu.
• Return control to the menu window without making any
changes at the menu options window.
• Select the item to change its unit of measurement in multiple
data displays.
• Close the menu when the menu window is active.
• Confirm an operation in menu operation.
• Long-push to hide or show nav data and 3-axis speed data
in the berthing display.
• Adjust the screen brilliance in 10 levels including off.
decrease the brilliance,
quickly increase or decrease the brilliance, press and hold
the related cursorpad point.
• Move the cursor in menu operation.
MENU
UNIT UNIT
DISP
ESC
BRILL
TRKG DAY
RNG ENT
MODE NT
4 No use
UNIT
DAY
RNG
NT
6
5
Function
to increase the brilliance. To
6. BERTHING DISPLAY
7 9
MENU
ESC
BRILL
ENT
8
to
6-3