Equipment Information - Furuno GS-100 Operator's Manual

7. MAINTENANCE, TROUBLESHOOTING
7.5

Equipment Information

You can display the information of this equipment from the menu.
1. Press the MENU ESC key to open the main menu.
2. Select [4 Maintenance] then [1 Information].
3. Select [1 Display Unit] or [2 Antenna Unit].
4. Select the information to display.
Main board for display unit
Panel board for display unit
5. Press the ENT key to close each information window.
6. Press the MENU ESC key to close the main menu.
7-4
[1 Display Unit]
[2 Antenna Unit]
CAN board for display unit
Main board for antenna unit
GNSS for antenna unit
Sensor for antenna unit