Berthing Line; How To Register A Berthing Line - Furuno GS-100 Operator's Manual

3-axis speed data*
from the GS-100 in
NAV data window
The data in dashed
rectangle can not
be displayed.
*: Press the TRKG MODE
key to switch between
SOG and STW.
The data in dashed
rectangle can not
be displayed.
6.7

Berthing Line

Berthing lines, which can be used to assist in berthing operations, can be created and
edited at the GS100. The saved lines can be sent to the DS-600 for display. A maxi-
mum of 100 lines can be saved in the GS-100 and each line can have up to three
points.
6.7.1

How to register a berthing line

1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [5 Berthing Line].
3-axis speed data in NAV data (3 axis in NAV)
NAV data
3-axis speed data and NAV data (3 axis and NAV)
3-axis speed data, NAV data OFF (3 axis)
6. BERTHING DISPLAY
Long-push ENT.
Long-push ENT.
Long-push ENT.
3-axis speed
data*
3-axis speed
data*
6-11