Sip Configuration; Configure The Basic Sip Parameters; Configure The Sip Timer Values; Configure The Response Status Code Handling - Cisco 7800 Series Administration Manual

Cisco IP Phone Installation
where A1 = username ":" realm ":" passwd
and A2 = Method ":" digest-uri

SIP Configuration

SIP settings for the Cisco IP Phone are configured for the phone in general and for the extensions.

Configure the Basic SIP Parameters

Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > SIP.
Step 2
In the SIP Parameters section, set the SIP parameters as described in
Step 3 Click Submit All Changes.

Configure the SIP Timer Values

Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > SIP.
Step 2 In the SIP Timer Values section, set the SIP timer values in seconds as described in
on page
Step 3
Click Submit All Changes.

Configure the Response Status Code Handling

Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > SIP.
Step 2
In the Response Status Code Handling section, set the values as specified:
235.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
Access the Phone Web Page, on page
SIP Parameters, on page
Access the Phone Web Page, on page
Access the Phone Web Page, on page
SIP Configuration
80.
232.
80.
SIP Timer Values (sec),
80.
55