Remove The Phone From The Non-Lockable Wall Mount - Cisco 7800 Series Administration Manual

Hardware and Accessory Installation
Figure 17: Phone to Wall Bracket Attachment
Step 5
Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into
position.
Step 6 Proceed to

Remove the Phone from the Non-Lockable Wall Mount

The phone mounting plate contains two tabs to lock the plate into the wall bracket. The following figure shows
the location and shape of the tabs.
Adjust the Handset Rest, on page
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
Remove the Phone from the Non-Lockable Wall Mount
115.
105