Assign A Ringtone To An Extension; Add Distinctive Ringtone - Cisco 7800 Series Administration Manual

Assign a Ringtone to an Extension

Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Extn.
Step 2 Under Call Feature Settings in the Message Waiting, choose Yes to enable.
Assign a Ringtone to an Extension
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > Ext(n), where (n) is the number of an extension.
Step 2
Under Call Feature Settings, use the Default Ring (n) drop-down list box to specify one of the following:
• No Ring
• Choose one of the available 12 ringtones.
Step 3 Click Submit All Changes.

Add Distinctive Ringtone

You can configure the characteristics of each ring tone using a ring tone script. When phone receives SIP
Alert-INFO message and the message format is correct, then the phone plays the specified ringtone. Otherwise,
the phone plays the default ringtone.
Procedure
In a ring tone script, assign a name for the ring tone and add the script to configure a distinctive ringtone in
the format:
n=ring-tone-name;h=hint;w=waveform-id-or-path;c=cadence-id;b=break-time;t=total-time
where:
n = ring-tone-name that identifies this ring tone. This name appears on the Ring Tone menu of the phone. The
same name can be used in a SIP Alert-Info header in an inbound INVITE request to tell the phone to play the
corresponding ring tone. The name should contain the same characters allowed in a URL only.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
138
Access the Phone Web Page, on page
Access the Phone Web Page, on page
Cisco IP Phone Administration
80.
80.