Program Jog Operation; Figure 51. Program Jog Operation; Table 85. Procedure Function Related Objects - Parker P Series User Manual

0x2303

Table 85. Procedure Function Related Objects

7.1.2 Program Jog Operation

Jog operation is a function to check the action of the servo motor by speed control, without
the host device, based on the preset operation speed and operation time.
Please check the following before operation
 The main power is ON
 No alarm
 Servo is OFF
 Speed and time are set considering the condition of the machine

Figure 51. Program Jog Operation

Parker Hannifin
Speed Command S-
-
curve Time
UINT RW
P series User Guide
No ms
152