Bluetooth Settings; Chapter 5. Bluetooth Settings - Wasp WWS500 Programming Manual

Chapter 5

BLUETOOTH SETTINGS

See Chapter 3 for step-by-step setup instructions.
Connect and Disconnect
Scan the "Set Connection" barcode before pairing up the WWS500 Freedom
Scanner and the Bluetooth dongle/internal Bluetooth adaptor.
Set Connection
Scan the "Disconnect Bluetooth" barcode if you are moving the scanner to a
different PC or Bluetooth dongle/adaptor. After scanning this barcode you
will need to scan the factory default barcode on page 7.
Disconnect Bluetooth
Bluetooth Power Off Settings
This option controls the length of time that the Bluetooth radio will stay
powered on when not in use.
3 Minutes
1 Minute
5 Minutes
10 Minutes
29