Specifications
For specifications on the available PoE ports, refer to
tions (Page
For PoE power output specifications, refer to
23)".
4.3
Fiber Optic Ethernet Ports
Optional 100Base-FX, 1000Base-SX and 1000Base-LX fiber optic Ethernet ports are
available for ports 9 and 10 with either LC (Lucent Connector) and SC (Standard or
Subscriber Connector) connectors. Make sure the Transmit (Tx) and Receive (Rx) con-
nections of each port are properly connected and matched to establish a proper link.
Available Ports
1
1
2
Figure 4.8
LEDs
Each port features an LED that indicates its link/activity state.
1
1
Figure 4.10
Specifications
For further specifications, refer to
24)".
RUGGEDCOM RS900GP
Installation Manual, 06/2020, C79000-G8976-1026-07
24)".
Tx Connector
Rx Connector
SC Connector
1
Link/Activity LED
LED for Fiber Optic Ethernet
Ports
"Copper Ethernet Port Specifica-
"PoE Output Specifications (Page
2
1
Tx Connector
1
Rx Connector
2
Figure 4.9
State
Green (Solid)
Green (Blinking)
Off
"Fiber Optic Ethernet Port Specifications (Page
Communication Ports
4.3 Fiber Optic Ethernet Ports
2
LC Connector
Description
Link established
Link activity
No link detected
21