2.3.2 Mounting The Device To A Panel - Siemens RUGGEDCOM RS900GP Installation Manual

Removing the Device
To remove the device from a DIN rail, do the following:
1.
2.
3.
2.3.2 Mounting the Device to a Panel
For panel installations, the RUGGEDCOM RS900GP can be equipped with panel
adapters that allow the device to be attached to a panel in multiple orientations.
RUGGEDCOM RS900GP
Installation Manual, 06/2020, C79000-G8976-1026-07
Insert a flathead screwdriver into the slot of the sliding release and move it
down.
1
DIN Rail
1
DIN Rail Adapter
2
Figure 2.3 Removing the Device from a DIN Rail
Swing the bottom of the device away from the DIN rail.
Lift the device off the DIN rail.
2.3.2 Mounting the Device to a Panel
2
Installing the Device
3
1
2
1
9