Table of Contents
Advertisement
Important Safety Instructions
Additional Safety Instructions for Installation Personnel
Installing the Hardware
2-ii
Always follow these basic safety precautions when using the system:
1.
Read and understand all instructions.
Follow all warnings and instructions marked on the product.
2.
DO NOT block or cover the ventilation slots and openings. They
3.
prevent the product from overheating. DO NOT place the product in a
separate enclosure, unless proper ventilation is provided.
4.
Never spill liquid on the product or drop objects into the ventilation
slots and openings. Doing so may result in serious damage to the
components.
5.
Repair or service must be performed by a qualified repair person.
6.
The product is provided with a 3-wire grounding type plug. This is a
safety feature. DO NOT defeat the safety purpose of the grounding
type plug. DO NOT staple or otherwise attach the AC power supply
cord to building surfaces.
7.
DO NOT use the product near water or in a wet or damp place (such as
a wet basement).
Install the product to meet all the environmental and electrical requirements
listed in the specifications (see Appendix D).
1. DO NOT install telephone wiring during a lightning storm.
2. DO NOT install telephone jacks in a wet location unless the jack is
specifically designed for wet locations.
3. Never touch uninsulated telephone wires or terminals, unless the tele-
phone line has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.
5. The system control unit must be securely wall mounted.
CAUTION:
If any wiring from the extension jacks leaves the building premises,
you must install AT&T 503A1 IROB protectors (see Appendix D).
CAUTION:
Use only AT&T-manufactured PARTNER modules in the PARTNER
Plus Communications System.
SAVE THESE INSTRUCTIONS
Advertisement
Table of Contents
