Table of Contents
Advertisement
PROGRAMMING
Temperature, time and other parameters must be set before operating. Once these parameters are set,
the fryer can be operated at the touch of a button.
Press
to enter the program mode and scroll through the parameters. If the Parameter Lock feature
is on, LoC is displayed in the window and program entry cannot be accessed. To access the program
mode while LoC is on, press
Parameter Lock feature off, see Program Guide below.
Programming Guide
Once in the program mode, the parameters are displayed in the order listed below. To exit the program
and save changes, press and hold
PARAMETER
Left Timer
Press
Press
Right Timer
Press
Set Temperature
temperature.
Offset
Calibration
Melt Options:
Press
Liquid shortening
Solid shortening
option.
No melt
Press
Energy
Source
source of heat.
Press
Parameter Lock
unlock program entry.
Press
Fahrenheit or
Celsius
select Fahrenheit or Celsius.
for approximately 2 seconds.
SELECT
or
to enter time.
or
to enter time.
or
to enter
For service only
or
to select melt
or
to select
or
to lock or
or
to
– 18 –
within 6 seconds of pressing
DISPLAY
LED is lit above the left basket
icon. The time value is displayed
in window.
LED is lit above the right basket
icon. The time value is displayed
in window.
The temperature value is
displayed in window.
00F
or
-00F
CY L (Liquid shortening)
or
CY S (Solid shortening)
or
CY O (No melt)
gAS
or
ELEC
LoC (Unlock Parameter)
or
ULoC (Lock Parameter )
F
or
C
. To turn the
SCROLL
Press
and
scroll to next
item.
Press
and
scroll to next
item.
Press
and
scroll to next
item.
Press
and
scroll to next
item.
Press
and
scroll to next
item.
Press
and
scroll to next
item.
Press
and
scroll to next
item.
Press
and
scroll to next
item.
Advertisement
Table of Contents
