Control Panel Components - Vulcan-Hart VC4ED Service Manual

FULL SIZE ELECTRIC CONVECTION OVEN - REMOVAL AND REPLACEMENT OF PARTS
Left Side Panel
1. Remove the screws which secure the left side
of the top front cover, bottom front cover and
control panel.
2. Remove the seven screws securing the left
side panel.
3. Pull the left side panel out at the bottom then
down to remove.
4. Reverse the procedure to install.
CONTROL PANEL
COMPONENTS
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
Removable Components
1. Remove the control panel as outlined under
"COVERS AND PANELS".
2. Remove the component being replaced.
3. Reverse the procedure to install the
replacement component, then check oven for
proper operation.
Page 7 of 60 F25105 (December 2001)