Setup Software - Ricoh D1 Operating Instructions Manual

Setup Software

The following describes the setup software, which contains setup tools, general utility and the
manual. This can be used in Windows.
IMPORTANT
• If you are using Windows 8 or later version:
when you run the installer that has been
downloaded from the Website, a Windows
SmartScreen message may appear. When
you obtain the installer from a reliable supplier,
confi rm [App:] and [Publisher:], and then click
[Run anyway].
Turn the computer ON to start the Windows.
Insert the CD-ROM that came with this product into
your computer's CD-ROM drive.
[Tap to choose what happens with this disc.]
appears in the upper right part of the screen. Click
the message.
REFERENCE
• If you are using Windows 7 or earlier version, this message screen does not appear. Go
to the next step.
• This message will disappear automatically after a certain period of time. In this case,
open the drive where the CD-ROM is located from [Computer], then execute [Setup.exe].
Click [Setup.exe].
REFERENCE
• If the [AutoPlay] screen does not appear, open
the drive where the CD-ROM is located from
[Computer], then execute [Setup.exe].
The main menu screen appears.
1
3