Snmp - Ricoh D1 Operating Instructions Manual

SNMP

Item
Web browser
Authentic
Community
Trap Community
Trap Address(IP)
SysContact
SysName
SysLocation
EnableAuthenTrap
Details
Sets Authentic community name. This is used
when accepting the SNMP Set Request.
Sets Trap community. Used when Trap is sent.
Sets Trap Destination Address. Enter the address
in dotted decimal notation "xxx.xxx.xxx.xxx".
"0.0.0.0" disables Trap.
Sets SysContact. Administrator's address is used
normally.
Sets SysName. Host name or domain name is
used normally.
Sets SysLocation. The location of the device is
used normally.
Enables EnableAuthenTrap. SNMP Trap is sent
to IP address set as "Trap Destination Address"
when the community violation occurs.
Web Browser Setup Items
Default
public
public
0.0.0.0
None
None
None
2
6
83