Message Alert Tone - VTech LS6245 User Manual

Answering system settings

Message alert tone

When the answering system is turned on, the telephone
beeps every 10 seconds to alert you of new messages.
The tone stops when all new messages have
been reviewed.
To change the setting:
using the telephone base:
1. Press the MeNu softkey when the telephone base is
not in use.
/
2. Press VoL +
then press the SeLeCT softkey.
/
3. Press VoL +
then press the SeLeCT softkey.
/
4. Press
VoL +
then press the SeLeCT softkey.
/
5. Press VoL +
press the SeT softkey to confirm your setting.
using the handset:
Press the MeNu softkey when the handset is not
1.
in use.
/
2. Press VoL +
ANS. SySTeM, then press the SeLeCT softkey.
3. Press /
VoL +
SeLeCT softkey.
/
4. Press VoL +
SeLeCT softkey.
/
5. Press VoL +
softkey to confirm your setting; or press the BACK softkey to exit to the
previous menu without making any changes.
The answering system must be turned on for the message alert tone
to function.
/ to highlight Ans. system,
or VoL -
/ to highlight Ans sys setup,
or VoL -
/ to highlight Msg alert tone,
or
VoL -
/ to select on or off, then
or VoL -
/ or / /
VoL -
CID
/ or / /
VoL -
CID
/ or / /
VoL -
CID
/ or / /
VoL -
CID
to highlight
to highlight Ans sys setup, then press the
to highlight Msg alert tone, then press the
to select on or off, then press the SeT
41
Ans. system
Directory
Cal l log
SELECT
Del al l old
Record memo
Ans sys setup
SELECT
# of rings
Remote code
Msg alert tone
SELECT
MSg ALERT TONE
On
Off
SET