Bluetooth Setup; Setup Cell - VTech LS6245 User Manual

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cell phone or headset with your LS6245, you
must first pair and connect your Bluetooth device(s) with the telephone base.

Setup cell

Before you begin, make sure that your Bluetooth enabled
cell phone is not connected to any other Bluetooth
device. Refer to your cell phone user's manual to learn
how to search for or add new Bluetooth devices.
To pair and connect a cell phone:
Press the MeNu softkey on the telephone base
1.
when it is not in use.
/
2. Press
VoL +
press the SeLeCT softkey.
/
3. Press
VoL +
press the SeLeCT softkey.
• If a device is already connected to the telephone
base, Connected devs will be temp.
disconnected displays. Press the oK softkey to
temporarily disconnect the device and continue
the pairing process.
Press the NeXT softkey to set the telephone base to
4.
discoverable mode.
5. Turn on the Bluetooth feature of your cell phone and
search for or add new devices.
Once your cell phone finds VTech LS6245, select it.
6.
7. Enter the PIN of the telephone base (the default
PIN is 0000) into your cell phone to continue the
pairing process.
8. When a device is successfully connected,
Device connected to base, and
displays.
• When you already have two devices on the
active devices list, press the yeS softkey to
connect to your paired cell phone. You are
prompted to replace an existing device on the
active devices list (page 18).
The pairing process may take up to one minute. If the pairing process fails,
try again.
/ to highlight Bluetooth, then
or
VoL -
/ to highlight Setup cell, then
or
VoL -
1 and/or 2
14
Page al l HS
Intercom
Bluetooth
SELECT
Setup cel l
Setup headset
Active devices
SELECT
Pls set your
cel l to search
for devices
NEXT
LS6245
discoverable
PIN:0000
Pairing
complete
Device
connected
to base