Yamaha PHAZER PZ50X Supplementary Service Manual page 93

Y Fasten the tail/brake light lead
and brake hose to the frame rear
cross member with the plastic
band. Install the plastic band with
its buckle positioned towards the
rear of the machine and its end
facing to the right.
Z 40 ~ 50 mm (1.6 ~ 2.0 in)
[ Parking brake cable
\ Gear motor lead coupler
(PZ50GT/PZ50RT/PZ50MT/
PZ50VT/PZ50MP)
] Fasten the wire harness, brake
hose, and parking brake cable
with the plastic band.
_ Battery
a Fuse box
b Main fuse
c Starter relay
d Starter relay lead
e Load control relay
f Fuel injection system relay
g Headlight relay
h Radiator fan motor relay
i Gear motor relay 1 (PZ50GT/
PZ50RT/PZ50MT/PZ50VT/
PZ50MP)
j Gear motor relay 2 (PZ50GT/
PZ50RT/PZ50MT/PZ50VT/
PZ50MP)
k Gear motor relay 3 (PZ50GT/
PZ50RT/PZ50MT/PZ50VT/
PZ50MP)
l Passenger grip warmer relay
(PZ50VT/PZ50MP)
CABLE ROUTING
87
SPEC