Yamaha PHAZER PZ50X Supplementary Service Manual page 91

I Oil tank inlet hose
J Oil tank outlet hose
K Place the end of the coolant res-
ervoir breather hose to the inside
of the frame front cross member.
L Fasten the starter motor lead and
negative battery lead to the radi-
ator joint pipe with the plastic
band.
M Fasten the wire harness, starter
motor lead, and negative battery
lead to the oil tank with the plas-
tic band. Face the end of the
plastic band upward.
N Starter motor lead
O Negative battery lead
P Fasten the starter motor lead,
negative battery lead, and wire
harness at the white tape to the
oil tank with the plastic band.
Face the end of the plastic band
upward.
Q Negative battery lead coupler
R ECU lead
S ECU
T DC back buzzer lead (PZ50GT/
PZ50RT/PZ50MT/PZ50VT/
PZ50MP)
U Positive battery lead
V To the tail/brake light
W Tail/brake light lead
X Fasten the tail/brake light lead to
the frame rear cross member
with the plastic band, making
sure to route the lead to the
inside of the cross member.
Install the plastic band with its
buckle positioned towards the
rear of the machine and its end
facing to the right.
CABLE ROUTING
85
SPEC