Yamaha PHAZER PZ50X Supplementary Service Manual page 85

1 To the oil pressure switch
2 Throttle position sensor coupler
3 Fuel hose
4 Fasten the corrugated tube and
wire harness to the frame front
cross member with the plastic
band. (PZ50/PZ50GT/PZ50RT/
PZ50MT)
5 Sub-wire harness coupler
6 Fasten the corrugated tube to the
headlight stay with the plastic
band. (PZ50/PZ50GT/PZ50RT/
PZ50MT)
7 Fasten the fuel hose with the
hose clamp. Face the ends of the
hose clamp outward, angled 45°
downward.
8 Rectifier/regulator
9 Frame ground lead
0 Wire harness
A Speed sensor coupler
B Fuel tank breather hose
C Fasten the speed sensor lead
and fuel tank breather hose to
the frame rear cross member
with the plastic band.
D To the auxiliary DC jack
(PZ50GT/PZ50RT/PZ50MT/
PZ50VT/PZ50MP)
E Fasten the speed sensor lead
and fuel tank breather hose with
the holder.
F Drive guard
G Fasten the speed sensor lead
and fuel tank breather hose with
a plastic locking tie.
H Fasten the speed sensor lead
and fuel tank breather hose with
the holder. Be sure to bend the
holder so that the lead and hose
will not come loose.
I Fasten the speed sensor lead
with the holder. Be sure to bend
the holder so that the lead will
not come loose.
J Speed sensor
CABLE ROUTING
79
SPEC