Yamaha PHAZER PZ50X Supplementary Service Manual page 87

K Cylinder identification sensor
L Ignition coil
M Fasten the wire harness to the
frame front cross member with
the plastic band. (PZ50VT/
PZ50MP)
N Fasten the fuel tank breather
hose, auxiliary DC jack lead, and
speed sensor with the plastic
band. (PZ50VT/PZ50MP)
O Auxiliary DC jack lead (PZ50VT/
PZ50MP)
P To the left handlebar switch
Q Frame rear cross member
R To the speed sensor
S Align the paint mark on the fuel
tank breather hose with the top
of the grommet.
CABLE ROUTING
81
SPEC