Battery Installation And Charging - VTech DS6111 User Manual

Getting started

Battery installation and charging

Install the battery as shown below. The battery may have enough charge for short
calls. For best performance, charge the handset for at least 16 hours. When the
battery power s low, the handset wll beep, dsplay LOW BATTERY and
flash on the handset screen. Place the handset in the telephone base to charge the
battery when not n use. See the table on page 33 for battery operatng tmes.
1. Insert the plug of the battery as ndcated. Make sure t s plugged securely
and matches the color-coded label nsde the battery compartment.
2. Place the battery wth the label THIS SIDE UP facng up and the wres nsde
the battery compartment.
3. Align the cover flat against the battery compartment, then slide it upwards
untl t clcks nto place.
4. Charge the handset by placng t n the telephone base. The handset charge
lght wll be on when chargng.
1
2 3
www.vtechphones.com
wll
Charge lght
4
• If the handset
wll not be used
for a long tme,
dsconnect and
remove the battery
to prevent possble
leakage.
• To purchase a
replacement
battery, vst our
webste at www.
vtechphones.
com or call
1 (800) 595-9511.
In Canada, go to
www.vtechcanada.
com or call 1 (800)
267-7377.
3