DAl Mode; Home Area Code - VTech CS5121-2 User Manual

• If, n the future,
your phone
servce provder
requres you to
dal the area code
when makng a
local call, or you
want to cancel the

home area code

you have already
programmed,
reprogram your
home area code
to 000.
• Press
CHAN/REMOVE
when n the home
area code menu
to delete the
stored home area
code. ___ wll be
dsplayed.
10
Telephone settings
Dial mode
If you have touch tone servce, the telephone s ready for use as soon as the
battery s charged. If you have pulse (rotary) servce, you wll need to change
the dal mode.
1. Press PROG when the handset s not n use.
2. Press or untl the screen dsplays DIAL MODE: and the current settng.
3. Press SELECT. The current setting flashes.
to select TONE or PULSE.
4. Press or
Press SELECT to confirm your selection. You will hear a confirmation tone.
5.
Home area code
If you dal your local calls usng only seven dgts (area code not requred), you can
program your home area code, followng the steps below. By programmng your
home area code, when you receve a call wthn your local area, the telephone
number wll automatcally be stored wthout the area code n the call log.
Press PROG when the handset s not n use.
1.
untl the screen dsplays HOME AREA CODE.
2. Press or
3. Press SELECT. The stored area code is displayed with the first digit flashing.
4. Use the dal key pad to enter the desred home area code.
5. Press SELECT to confirm. You will hear a confirmation tone.
www.vtechphones.com