User Operation; Preparation - Canon imageFORMULA P-208 Service Manual With Parts Catalog

III. USER OPERATION
For details, refer to the user manual of
this machine.
For installation and maintenance, refer to
"CHAPTER 4 INSTALLATION &
MAINTENANCE".

1. Preparation

1) Connecting the Scanner to the Computer
Turn OFF the Auto Start switch on the rear
of the scanner, and use the supplied USB
cable to connect the scanner to the com-
puter.
Figure 1-301
2) Auto Start Switch
There is an Auto Start switch at the rear of
the scanner for setting whether to operate
the scanner as a storage device.
Figure 1-302
ON
The scanner is recognized as a storage
device by the computer. Starting Cap-
tureOnTouch Lite preinstalled in the
scanner enables you to perform scanning
COPYRIGHT © CANON ELECTRONICS INC. 2012
on a computer without the scanner driver
installed.
OFF
The scanner is recognized as a scanning
device by the computer. You can connect
the scanner to a computer with the scan-
ner driver installed, and perform scanning
using an application, such as the supplied
CaptureOnTouch.
3) Power source
Open the document feed tray to turn on
the scanner's power supply.
The scanner turns ON, and the Start but-
ton lights.
CANON P-208 FIRST EDITION
CHAPTER 1 GENERAL DESCRIPTION
Figure 1-303
1-7