Feed Roller - Canon imageFORMULA P-208 Service Manual With Parts Catalog

CHAPTER 3 DISASSEMBLY & REASSEMBLY
4) Remove the registration roller
Note: The gears at both ends may be de-
tached from the shaft.
Figure 3-307
3-12

4. Feed Roller

1 .
1) Remove the control PCB.
(Page 3-10)
2) Remove the light guide and sintered
bearing according to the steps in "Regis-
tration Roller [Drive]".
(Page 3-11)
3) Remove the feed roller
the feed roller shaft.
COPYRIGHT © CANON ELECTRONICS INC. 2012
1 together with
Figure 3-308
CANON P-208 FIRST EDITION