All - Canon imageFORMULA P-208 Service Manual With Parts Catalog

CHAPTER 5 TROUBLESHOOTING

5. All

In this mode, "Registration (Auto)",
"Light" and "Regist sensor" described above
are performed continuously. The purpose
and timing to perform each adjustment are
discussed in the corresponding section.
Adjustment sheet
Use a document on which black lines are
written as a shading sheet. (For details
on how to write black lines, refer to
Adjustment sheets in "Registration
(Auto)."
Operation Procedure
1) Clean feed path, roller, and reading glass.
2) Load a prepared adjustment sheet. Load
the sheet with the black-lined side facing
down. Insert them properly not to cause
skew.
Note: Do not set extra sheets.
Front
Back
Figure 5-235
5-20
Back
COPYRIGHT © CANON ELECTRONICS INC. 2012
3) On the Adjustment screen, select [All].
Figure 5-236
4) The adjustment starts automatically. The
sheets are fed and the progress screen is
displayed.
Figure 5-237
CANON P-208 FIRST EDITION