Firm Version Up - Canon imageFORMULA P-208 Service Manual With Parts Catalog

CHAPTER 5 TROUBLESHOOTING

2. Firm Version Up

The method for writing firmware varies
depending on whether that firmware has
already been registered or has not been
registered. The operation procedures are
shown below.
Note: Do not remove the USB cable or turn
the power OFF during loading. If the
power is turned OFF, it returns to its
original state when restarted, but this
is not guaranteed.
For registered firmware
In this mode, the file saved in the service
tool is selected and its version is up-
graded.
1) Select the version to write and then select
[Version up].
Figure 5-251
2) The confirmation screen is displayed.
Select [OK].
Figure 5-252
5-26
3) Writing starts automatically and the pro-
4) When finished, the progress disappears
COPYRIGHT © CANON ELECTRONICS INC. 2012
gress screen is displayed.
Figure 5-253
and the complete screen appears. Select
[OK].
Figure 5-254
CANON P-208 FIRST EDITION