Battery Installation - VTech LS6425 User Manual

Getting started

Battery installation

Install the battery as shown below.
1. Plug the battery connector securely into the socket inside the handset battery
compartment, matching the color-coded label.
Place the battery with the label THIS SIDE UP facing up and the wires inside
2.
the battery compartment.
3. Align the cover flat against the battery compartment, then slide it towards the
center of the handset until it clicks into place.
4. Charge the handset by placing it in the telephone base or charger. The
CHARGE light is on when the handset is charging.
1
3
• If the handset will not be used for a long time, disconnect and remove the
battery to prevent possible leakage.
• To purchase replacement batteries, visit our website at www.vtechphones.com
or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
2
4
3
CHARGE light
remains on when
charging.