Answer On/Off; Call Screening - VTech LS6425 User Manual

Answering system settings

Answer on/off

The answering system must be turned on to answer and record messages. When
the answering system is turned on, the
base turns on and ANS ON displays on the handset.
To turn on or off with the telephone base:
/ANS ON/OFF to turn the built-in answering system on or off. When the
Press
answering system is turned on, it announces, "Calls will be answered." When the
answering system is turned off, it announces, "Calls will not be answered."
To turn on or off with a handset:
Press MENU/
1.
2. Press or
/SELECT.
press
MENU
3. Press or
/SELECT.
press
MENU
4. Press or
/SELECT.
MENU
• When you turn on the answering system at the telephone base with no memory
capacity left, the telephone announces, "Memory is full. Calls will not be
answered," and the answering system cannot be turned on. When you turn on
the answering system with a handset, the handset displays Memory full.
• If the memory capacity is less than 3 minutes, the telephone announces, "Less
than 3 minutes to record," and the handset displays Less than 3 min to record.

Call screening

Use this feature to choose whether incoming messages can be heard when they
are being recorded.
To turn on or off with a handset:
Press MENU/
1.
2. Press or
/SELECT.
MENU
3. Press or
/SELECT.
MENU
4. Press /SELECT to select >Call screening.
MENU
5. Press or
when the handset is not in use.
SELECT
to highlight >Answering sys, then
to highlight >Answer ON/OFF, then
to choose >On or >Off, then press
when the handset is not in use.
SELECT
to highlight >Answering sys, then press
to highlight >Ans sys setup, then press
to choose >On or >Off, then press
/ANS ON/OFF light on the telephone
MENU
45
>Call screening >Call screening
# of rings # of rings
CALL SCREENING CALL SCREENING
>On >On
/SELECT to save.